Measurement
If installing inside frame
(inside fit)
Step 1.
Prepare a pencil, paper and a tape measure.
Step 2.
Like the diagram above, measure the distances A, B and C. Normally the three distances would be similar, but if the window frame is made of wood the measurements can be different by approximately 10mm.
Step 3.
The height can be measured by entering the middle point, as D labelled on the diagram.
Step 4.
Choose the desired location of the chain/cord and enter it on the form.
If installing outside frame
(outside fit)
Step 1.
Like the diagram above, measure the distances A, B and C. Normally the blind needs to be installed on the frame, so please enter the measurement for distance A on the form provided.
Step 2.
Enter the height by measuring distance D in the middle.
Step 3.
Choose the desired location for the chain/cord and enter it on the form.